Breas Z2 Auto Portable Travel APAP System 718116

Breas Z2 Auto Portable Travel APAP System 718116

Please note that this unit is 3 months back order from Breas

The Z2 Auto™ CPAP builds on the form of the Z1® CPAP with an improved, quieter motor and Auto Start /Stop Feature. We added a free Qtube® to muffle the noise at the mask. At just 6.48” x 3.30” x 2.02” and 10.4 oz, it fits easily into your bag and won’t weigh you down. It’s perfect for taking your sleep apnea therapy anywhere you want to go.

Features:

• Lightweight, ultra-small Auto CPAP machine

• Optional integrated battery available called the PowerShell

• Does not require a special mask or tube. You can use any mask as long as it does not have proprietary connection.

• Download your sleep data from the Z2 Auto® to your iOS or Android phone or tablet with the free Nitelog® mobile app.

• USB connection to Windows based computers for download of sleep data to free DataViewer program and firmware upgrades.

• Waterless humidification from HME (Heat Moisture Exchanger)

• Z-Breathe® comfort feature • Auto Start / Stop Feature

Specifications:

Technical Specifications

30W Power Adapter

Unit Input range 100–240V, 50–60Hz

Typical power consumption 20W (30VA)

Maximum power consumption 35W (70VA)

Operating temperature 41ºF to 95ºF (5ºC to 35ºC)

Operating humidity 10–80% Relative Humidity, Non-Condensing

Operating altitude Sea level to 8,000 ft (2400 m)

Operating atmospheric pressure 101 to 75.3 kPA

Storage and transport temperature -4ºF to +140ºF (-20ºC to +60ºC)

Storage and transport humidity 10–95% Relative Humidity, Non-Condensing

Storage and transport altitude No limit

Storage and transport atm. pressure No limit

Electromagnetic compatibility Compatible with IEC 60601-1-2

Aircraft use Complies with RTCA DO-160G Standard for use in flight

IEC 60601-1 classification Class II (double insulation), Type BF

Available modes Standby, CPAP, Auto-CPAP and CPAP/Auto-CPAP with Ramp

Sound pressure level 26 dBA

Nominal dimensions 6.48” X 3.30” X 2.02” (16.46 cm X 8.38 cm X 5.13 cm)

Weight 10.5 oz. (299 g)

Housing construction Flame retardant engineered thermoplastic

Supplemental oxygen Not for use with oxygen

Standard air filter Polyester

Air outlet The 22 mm air outlet complies with ISO 5356-1

Performance Specifications

Operating pressure range 4 to 20 cm H2O

Maximum single fault steady pressure 30 cm H2O

Pressure accuracy  ±(0.6 cm H2O + 4% of the measured reading)

Bluetooth Specifications

Panasonic Electronic Components

Bluetooth Module + BLE HCI W/ANTENNA

FCC ID T7V1315

FCC Compliance FCC PART 15 SUBPART C

Frequency 2400-2483.5 MHz

Modulation or Protocol Bluetooth Low Energy, V4.0

Over the air data rate 1 Mbit/s

Application throughput  0.27 Mbit/s

Security 128-bit AES with Counter Mode CBC-MAC and application layer user defined

Robustness Adaptive frequency hopping, Lazy Acknowledgement, 24-bit CRC, 32-bit Message Integrity Check

Latency (from a non-connected state) 6ms

Power-Output 10dBm

Sensitivity -93dBm

Standard IEEE 802.15.1

Package content:

Z2 Auto Device

Power Supply (AC Adapter and Power Cord)

Customer USB A to Micro B Cable

Customer CPAP Tube Adapter

4 ft. Slim Style CPAP Tube

Filters (2 – 1 installed in Z2, 1 in box)

Heat / Moisture Exchanger (HME)

Q-lite Muffler

8 in. Slim Style Tube

Z2 Auto Quick Start Guide

Z2 Auto User Guide